Page 121 - SF ELEC CAT_V4.0_WEB_F2-UPDATE-18-02-19

PUMPS – HIGH PRESSURE,
ELECTRIC

MODEL No. R14E-H REMOTE ELECTRIC HYDRAULIC PUMP

The R14E-H remote operated
pump gives the operator
complete control. Push button
operation permits the operator
to advance and retract at
will. The operator is never
committed to a full cycle, and
can always back off at any
time during the advance - even
under pressure. This feature
increases efficiency because
cuts and crimps can be
adjusted as necessary, simply C HYDRAULIC TOOLS & ACCESSORIES
by stopping the advance or
retract mode.
The electric motor shuts off
when UP button is released and
the pressure reaches to pre-set
valve of 685Bar. The ram can be
retracted while DOWN button is
depressed. The 3 metre remote
control cable provides both safety
and convenience. The operator can
set up an operation and then move
away from the work site before
engaging the tool.

Model No. Description Qty Oil pressure (Bar) 700
R14E-H Pump & Remote Switch 1 Reservoir Capacity (L) 1.7
Low Pressure (L/min) 2.9
FEATURES Oil Delivery High Pressure (L/min) 0.3
• Step down controller on transformer
• Two-stage pumping system for rapid advance Input Single Phase
• Adjustable output pressure to 700 Bar Voltage 230VAC/50Hz
• 360° swivel joint for hose manoeuvrability Size LxWxH (mm) 306x205x393
• Visual oil level Weight (kg) 16 (14.5 Dry)
• Wired remote control
• Lighter weight
• Durable resin cover and oil reservoir
• Hose holders on cover

SCAN PROUDLY MARKETED, SERVICED www.specialisedforce.com.au
& PLAY
& SUPPORTED AUSTRALIA WIDE

SYDNEY Head Office (02) 9547 1844 Adelaide (08) 8352 8866 Brisbane (07) 3256 6011 Townsville (07) 4728 8756 111
Darwin (08) 8984 4453 Melbourne (03) 9761 4199 Perth (08) 9354 8544 Port Hedland (08) 9172 1113 Tasmania 0427 423 217