Page 166 - SF ELEC CAT_V4.0_WEB_F2-UPDATE-18-02-19

SWIVELS & QUICK LINKS

SERIES 00505 UNDERGROUND LINE SWIVELS (MADE IN CANADA)

SPECIFICATIONS

DCD Line Swivels are typically constructed with a thrust bearing for tensile load and a radial
bearing for bending load.

They combine a high safe working load limit with a compact design. All sizes incorporate an oil seal and are
manufactured from high strength stainless steel. Sizes 00505-020 and larger are supplied with a grease point for
E UNDERGROUND PULLING
lubrication. This is particularly useful in overhead applications where high speed rotation is possible. All sizes of
both types are pull tested to verify the 3:1 safety factor and all swivelling sizes are fully capable of rotation at full
working load. Test certificates are available upon request.

D

A B

C

Safe Working Dimensions (mm) Replacement Weight
Model No.
Load (kN)* A B C D Pin Model No. (kg)
00505-005 3.3 16 7.1 4.8 64 00005-SLT 0.06
00505-008 5.0 20 7.1 4.8 78 00008-SLT 0.12 QUALITY
00505-010 10.0 22 9.5 7.9 86 00010-SLT 0.15 HIGH GRADE
00505-015 15.6 25 10.3 9.5 98 00015-SLT 0.23 STAINLESS
00505-020 22.2 32 13.5 10.3 121 00020-SLT 0.45
00505-025 31.1 35 14.3 12.7 130 00025-HEX 0.63 STEEL
00505-027 40.0 38 15.1 12.7 143 00025-HEX 0.77
00505-030 44.5 41 17.5 15.9 152 00030-HEX 0.95
00505-035 66.7 51 19.8 17.5 178 00035-HEX 1.70
00505-040 110.0 60 26.2 22.2 262 00040-HEX 3.50 SCAN
00505-045 222.0 76 30.2 28.6 349 00045-HEX 7.70 & PLAY
www.specialisedforce.com.au
* The Safe Working Load is calculated at 3:1 safety factor
SERIES K600 QUICK LINKS (MADE IN EUROPE)

SPECIFICATIONS

Quality European design and manufacture, zinc plated high quality
steel made to comply with standards EN362 & EN12275

Thickness Inside Suits
Length of Material Eye Opening DCD Swivel WLL* WLL* Break Wt
Model No. 5:1 3:1 Load
(mm) (mm) Width (mm) Model No.’s (kg)
NOT NUT (mm) (and larger) (kg) (kg) (kg) Opening
K600.08.W 88 8 17.5 17.5 00505-010 650 1,083 3,250 0.10
K600.10.W 106 10 20.5 20.5 00505-015 1,000 1,667 5,000 0.15 Inside Eve
K600.12.W 124 12 23.5 23.5 00505-020 1,250 2,083 6,250 0.26
K600.16.W 161 16 29.5 29.5 00505-030 2,500 4,167 12,500 0.63
* 5:1 safety factor for lifting is printed on the unit, however for pulling applications only 3:1 safety Thickness
factor is required (unless otherwise nominated)

156 SYDNEY Head Office (02) 9547 1844 Adelaide (08) 8352 8866 Brisbane (07) 3256 6011 Townsville (07) 4728 8756
Darwin (08) 8984 4453 Melbourne (03) 9761 4199 Perth (08) 9354 8544 Port Hedland (08) 9172 1113 Tasmania 0427 423 217