Wheeler-Rex 5624 PipeMaster Low Pressure Hydraulic Pipe Cutters
Unit consists of a cutting head with internal gears which operate the drive wheels and blade shaft.
- Cutting blades (except for No. 4616) must be cooled with water during cutting and are fully enclosed for safety.
- The cutter is held onto the pipe by a wide roller chain which is tensioned with a threaded take-up mechanism.
- A chart is included which tells the operator how much chain is required for various sizes of pipe.
- PipeMaster comes standard with cutting head, roller chain, wedges and water supply tank in a wood case.
- Blades are chosen based on pipe material and are not included with the basic machine (See related products).
- Maximum wall thickness for cutting is 25mm (1").
- The unit has a hydraulic motor which requires an external hydraulic power source (See related products).
Specifications
| Model No. | 5624 |
| Capacity | 150 - 600mm |
| Construction | Aluminium gearbox and side plates with steel and bronze gears, steel roller chain, aluminium wheels with urethane covering |
| Gearbox | Worm drive with 80 - 90W gear oil required |
| Max. Hydraulic Requirements | Up to 6GPM (22L/min) at 1500 PSI (103Bar) |
| Cutting Speed | 150mm of surface travel per minute |
| Cutting Clearance | Radial 200mm (8") - Axial 400mm (16”) |
| Blade Speed | 1200 RPM |
| Shipping Weight | 47kg |
Standard Accessories:
- Cutter Head
- Roller Chain
- 6 Wedges
- 4 Gallon portable water tank
- Storage case
Optional Accessories:
- Maruzen UH070 Petrol-Powered Pump
- Fairmont HFC30 Hydraulic Flow Control Valve
- 6m Twinline Hose Assy with M&F Flush Face Couplers Each End - Part # 421-806-B12NM/FF