Izumi PB-10N Hydraulic Pipe Bender (Made in Japan)
The PB-10N (Capacity- 15-50mm (1/2 - 2")) was designed to bend various sizes and various thicknesses of steel pipes without wrinkles.
- An aluminium alloy frame makes this bender lighter so that it can be easily carried to the job site.
- Bending shoes are designed to bend gas pipe or steel electrical conduit listed in the charts below.
- For use with any 700 bar hydraulic single-acting high-pressure pump.
PLEASE NOTE: Hydraulic Pumps & Bending Shoes Sold Separately - Unless Otherwise Indicated.
Suitable Conduits & Pipes
- Thin steel conduit (A) A15 (5/8”, 16mm) to A51 (2”, 50mm) to 90° in one shot
- Gas pipe (SGP) SGP15 (1/2”, 21.3mm) to SGP50 (2”, 60.3mm) to 90° in one shot
Specifications
| Model No. | PB-10N PB-10N INC FORMERS |
| Capacity | 15-50mm (1/2 - 2") Nominal Bore Pipe |
| Oil Volume Required | 400cc |
| Output Force | 108kN |
| Ram Stroke | 250mm |
| Size | 780mm Wide |
| Weight | 18.6kg (W/O Pivot Shoes and Bender Shoe) |
| Includes | Frame, Cylinder, Pivot shoes (2 pieces) and Angle gauge |
Bending Shoes
| Steel Conduit | ||
| Model No. | (mm) OD | |
| A15 | 15.9 | |
| B16 | 21.0 | |
| A25 | 25.4 | |
| A31 | 31.8 | |
| B36 | 41.9 | |
| A51 | 50.8 | |
| Gas Pipe | ||
| Model No. | (mm) OD | |
| *SGP-15 - 1/2" GAS | 21.3 | |
| *SGP-20 - 3/4" GAS | 26.9 | |
| *SGP-25 - 1" GAS | 33.7 | |
| *SGP-32 - 1 1/4" GAS | 42.2 | |
| *SGP-40 - 1 1/2" GAS | 48.3 | |
| *SGP-50 - 2" GAS | 60.3 | |
*Segmented bending required (to be placed on bending shoes 2 1/2 - 4")
NOTE:
- Available pumps include Durapac air, battery, electric or hand pumps.
- Please contact your local Specialised Force branch for details of available pumps.
Click on the link to download more information on the Izumi PB-10N Hydraulic Pipe Bender.