CBC UNI90 Electro-Hydraulic Pipe and Tube Mandrel Bender
The UNI90 (9210503) is an accurate and powerful bending machine able to bend large diameter pipe and tube as well as thin and delicate ones.
- The optimal and constant bending radii do not deform bent pipes: it is the ideal machine to satisfy every user’s need in:
- Plumbing
- Nautical
- Hydraulic
- Industrial
- Plant installation
- Ornamental field
Technical Details
- Spheroidal cast ironed body on metal steelwork base.
- 3-phase 380V 50Hz asynchronus, self-braking motor (different voltages can be supplied on request) 2 speeds 4kw power with inverter.
- Digital electronic control board with microprocessor and display to set and control the required bend and recovery angle. It can store up to 50 bending programs Each program can memorize up to 9 bending angles in sequence.
- Automatic return to stroke end.
- Switch panel low voltage (24V.).
- 180° Maximum allowed bending angle.
- Computerized hydraulic system per the closing and opening of locking and bending tools.
- The mandrel’s extraction can be set up for a high definition of the bend.
- Dimensions: (machine only) Length 110mm, Width 700mm, Height 1310mm
- Weight: 970kg
| Standard Version | Code |
Electrohydraulic Digital UNI 90, 380v/50Hz with Automatic Hydraulic Device for the Closing and Opening of Locking Devices and Bending Tools. 3m Long Mandrel Arm Kit with Hydraulic Device for the Mandrel Extraction, Plane Regulator, Notches, Mandrel Rod Ø 20mm. | 9210503 |
| With 4m Long Mandrel Arm Kit | 9210504 |
| With 5m Long Mandrel Arm Kit | 9210505 |
| With 6m Long Mandrel Arm Kit | 9210506 |
Bending Capacity
| Type of Pipe (With Mandrel) | Ø mm | Wall Thickness (mm) |
| Hard & Soft Copper and Annealed Brass Pipes | 90 | 3 |
| Steel Pipes for Electrical Installations | 90 | 2 |
| Stainless Steel AISI 304/316 Pipes | 80 | 3 |
| Hydraulic Steel Tubes ST. 35.4 | 90 | 3 |
| Furniture Tubes | 90 | 2 |
| FE Boiler Pipes | 90 | 2 |
| Aluminium Pipes | 90 | 4 |
| Gas Pipes UNI 5745 | 3" | 3 |
| Square Pipes | 70x70 | 3 |
| Minimum Radii | 2D | |
Powered by Froala Editor