CBC UNI76 Pipe and Tube Bender
The UNI76 (9200676.1) is an accurate and powerful bending machine able to bend large diameter pipes (up to 76mm OD or 3" Nominal Bore).
- The optimal and constant bending radii do not deform bent pipes: it is the ideal machine to satisfy every user’s requirement in:
- Plumbing
- Nautical
- Hydraulic
- Industry
- Plant installation
- Ornamental pipe work.
Technical Details
- Spheroidal cast iron body on metal base.
- 3-phase 380V 50Hz asynchronus, self-braking motor (different voltages can be supplied on request)-2 speed with 3/4Kw power. Digital electronic control board with microprocessor and display to set and control the required bend and recovery angle. It can store up to 50 bending programs. Each program can memorize up to 9 bending angles in sequence.
- Automatic return to stroke end.
- Switch panel low voltage (24V.).
- 180° Maximum allowed bending angle.
- Dimensions: length 1000 mm, width 710 mm, height 1100 mm
- Weight: (kg): 430
| Standard Version | Code |
| Digital Electric UNI 76 380V/50Hz Supplied with Quick Guide Positioner and 3 Interchangeable Outlet Shafts, Reinforcing Tie-Rod and Guide Support Reduction. | 9200676.1 |
Bending Capacity
| Type of Pipe (Without Mandrel) | Ø (mm) | Wall Thickness (mm) |
| Hard & Soft Copper and Annealed Brass Pipes | 76 | 8 |
| Steel Pipes for Electrical Installations | 76 | 6 |
| AISI 304/316 Stainless Steel Pipes | 76 | 4 |
| Hydraulic Steel Tubes ST. 35.4 | 76 | 6 |
| Furniture Tubes | 76 | 6 |
| FE Boiler Pipes | 76 | 6 |
| Aluminium Pipes | 76 | 8 |
| Gas Pipes UNI 5745 | 3" | Standard |
| Square Pipe | 60x60 | 3 |
| Standard Bending Radii | 3D & 4D | |
NOTE: Special Diameters and Bending Radii Available on Request
Powered by Froala Editor