CBC UNI60 Combi Pipe and Tube Bender
The UNI 60 COMBI (9200405) pipe bender is a machine suitable to bend metal pipes with a bending angle from 0° to 180°.
It was designed to bend without mandrel and to be used for the ring rolling of pipes, structural sections, and plates.
By operating the geared motor the die mounted on the outlet shaft rotates clockwise with programmable width corresponding to the angle imprinted on the pipe.
- Cast iron body on metal base.
- Asynchronous motor 230V/50Hz/1,50Kw (different voltages on request) 2800 RPM
- Maximum bending angle: 180°
- Digital control panel with multilingual microprocessor for programming, controlling and recovering the bending angle. It is capable of storing 50 bending programs and each of them can store 9 sequential bending angles
- Low voltage (24V) printed circuit board
- Bending angle setting
- Electrobrake
- Dimensions: Length 780mm, Width 430mm, Height 1000mm
- Weight: 170kg
| Standard Version | Code |
with one square interchangeable shaft of diam. 32, quick guide positioner, 2 ring rolling shafts of diameter 40, 3 universal rollers, 2 lateral supports, pedal switch and base." | 9200445 |
Bending Capacity
| Type of Pipe (Without Mandrel) | Ø (mm) | Wall Thickness (mm) |
| Hard & Soft Copper and Annealed Brass Pipes | 54 | 4 |
| Steel Pipes for Electrical Installations | 50 | 2 |
| AISI 304/316 Stainless Steel Pipes | 42 | 3 |
| Hydraulic Steel Tubes ST. 35.4 | 48 | 4 |
| Furniture Tubes | 48 | 3 |
| FE Boiler Pipes | 48 | 4 |
| Aluminium Pipes | 54 | 5 |
| Gas Pipes UNI 5745 | 1.5" | Standard |
| Double Coated Aluminium Pipe | 63 | Standard |
| RHS Square Tube | ||
| Standard Bending Radii | 3D & 4D | |
NOTE: To Bend Pipes with Thickness Equal to or Over 2.5mm - Use the Twin Roller Set and Not the Guide
Please download catalogue page for details on available tooling and accessories to suit this bender.
Powered by Froala Editor
Powered by Froala Editor