Bloom Hydraulic Capstan Winches
Series 1000 and 1100V
- 682kg Capacity on 10:1 Ratio, 33m/min
- 1,363kg Capacity on 20:1 Ratio, 17m/min
(Optimum performance on 140 Bar Hydraulic System)
Series 1400
- High strength cast iron gear case, with aluminium capstans keyed to alloy steel hardened shafts
- 25:1 and 12.5:1 gear ratios provide versatility in power and speed
- Speeds of up to 30 MPM and pulls of 3,500KG
- Optimum performance on 207Bar Hydraulic System
Applications
| Lifting | Pulling Sliding |
| Positioning Lights | Underground Cable |
| Mast Towers Erection | Cable Pulling |
| Lifting Materials | Unloading Equipment |
| Overhead Lines | Utility Vehicle Recovery Water |
| Transformer Replacement | Sewer Pipelines |
Standard Features
| Gear Case |
| Bearings | Worm gear and worm shaft run on tapered roller bearings in an oil enclosed gear case. |
| Worm Shaft | One piece alloy steel hardened and ground to insure long service. | Output Shaft |
|
| Worm Gear |
| Capstan | Cast aluminium -keyed to shaft. |
| Gear Ratio | 20:1 and 10:1 ratios provide optimum efficiency in power and speed. | Motor Mount |
|
WARNING!
- Goods are not intended for use in the moving or lifting of persons!
- The inches described herein are neither designed nor intended for use or application to equipment used in the lifting or moving of persons and it is understood that all such use shall be at the sole risk of the user.
- The cable clamps on winches are not designed to hold rated loads.
- A minimum of 5 wraps of cable must be left on drum barrel to guarantee holding of rated load.
- Applications of winch where life would be endangered by any event are not recommended.
Please download the link for details on the Bloom Hydraulic Capstan Winches.