Products

Rail Construction / Maintenance

All 'Rail Construction / Maintenance' Products

Maruzen Low Pressure Hydraulic Pumps UH070 & UH130

Maruzen Low Pressure Hydraulic Pumps (Made in Japan)Compact petrol engine driven hydraulic power sources.Extensive range of tools available to suitEquipped with...

  • Engine petrol driven hydraulic power...
  • Extensive range of tools available t...

Mumme 5BD Series Barrell Drifts

Mumme 5BD Series Barrell DriftsBarrel drift used for aligning holes in construction and for expanding holes in mild steel.Forged from tough alloy steel.Taper is...

  • Forged from tough alloy steel...

Mumme 5FW & 7FW Series Fox Wedges

Mumme 5FW & 7FW Series Fox WedgeUsed for splitting mating surfaces.Also used for packing rail, machinery and structures level before fixing.Forged & gro...

  • Forged & ground blade with fine edge...

Mumme 5HCH Series Copper Hammers

Mumme 5HCH & 7HCH Series Copper HammersNon-sparking and non-marking copper hammers, forged from pure electrolytic copper.No oxygen so will not chip or break...

  • Non-sparking and non-marking...
  • Forged from pure electrolytic copper...

Mumme 5HSPSRH08 Spiking Hammer

Mumme 5HSPSRH08 Spiking HammerUsed in rail industry for spike hammering.Also known as a spike maul.For breaking up rocks, concrete & driving packing.Steel r...

  • This product must be maintained in a...

Mumme 5WHRG & 5WHSP Welding/Chipping Hammers

Mumme 5WH Series Welding/Chipping HammersUsed for chipping off slag and spatter around weldsAlso used as geologists’ or miners’ toolHead forged from chrome allo...

  • These products must be maintained in...

Mumme 7SCSH225 Cold Sets

Mumme 7SCSH225 Cold Sets Used For Striking With Sledge Hammer. Australian made Forged From Tough High Tensile Carbon Manganese Steel Hardened & Tempered...

  • This product must be maintained in a...

PIAB Dynamometers

PIAB DynamometersThe PIAB Dynamometer is excellent for measurement and control of tension forces, where accuracy, reliability and safety in all conditions is re...

  • Available in kg or kN...
  • From 250kg / 2.5 kN to 50000kg / 500...

Quick Release Chucks for use with Impact Wrench

Quick Release Chucks for use with Impact WrenchModel No.Hex OpenSquare Drive (")OAL (mm)Body Diameter (mm)Sleeve Diameter (mm)Opening Depth (mm)24037/16"1/25428...

Rail Roll Over Hook

Rail Roll Over Hook High quality powder coated roll over hook for turning over rail. Stamped, Certified & Tested NOTE: NOT TO BE USED FOR LIFTING. Speci...

  • Stamped, Certified & Tested...